Ungrounded Outlets
The most visible grounding deficiency in older Arlington TX homes. Homes built before the mid-1960s often have two-wire circuits with no ground conductor. The outlets have only two slots — no ground hole. Electronics, smart home devices, and appliances that depend on a ground for protection are not protected on these circuits.
We correct ungrounded outlets by running a ground wire from the outlet back to the panel, installing GFCI outlets (which provide shock protection without a ground wire and can be code-compliant in existing installations), or by replacing the circuit wiring with three-wire cable.
Missing or Undersized Grounding Electrode
The grounding electrode system connects the electrical panel to the earth — through ground rods, water pipes, or concrete-encased electrodes. Older Arlington TX homes sometimes have a single ground rod that does not meet current code, or a ground connection to a water pipe that no longer provides a continuous earth path due to plastic pipe replacement.
We assess the grounding electrode system at the service entrance and correct deficiencies to meet current NEC requirements.
Missing Bonding on Water and Gas Piping
Metal water and gas piping within 5 feet of where the pipe enters the building must be bonded to the electrical grounding system. This prevents the piping from becoming energized if a wiring fault occurs nearby. Older Arlington TX homes with original plumbing frequently have missing or inadequate bonding.
Panel Grounding Issues
Neutral and ground conductors that are improperly combined at a subpanel, ground wires that are loose or corroded at the bus bar, and missing ground conductors on specific circuits are all panel grounding issues we assess and correct.