Here is exactly what Bolt Electric inspects on every panel inspection visit. Nothing is skipped.
Bolt Electric provides electrical panel inspections in Arlington TX with written reports accepted by Texas insurance companies and real estate attorneys. We serve homebuyers with closing deadlines, homeowners with insurance requirements, and anyone who wants a straight answer about their panel. Same-day written report in most cases.
The home inspector flagged the panel. Your insurance company sent a letter. Or you just moved into an older Arlington home and want to know what you have. All three are good reasons to schedule an electrical panel inspection in Arlington TX.
Bolt Electric inspects panels for homebuyers, homeowners with insurance requirements, and anyone who wants a straight answer about their electrical system. We open the panel, check every component, and give you a written report. Call (817) 754-5700.
You are buying a home in Arlington TX. The general home inspector flagged the panel or could not fully assess it. You need a licensed electrician inspection before closing.
A general home inspector can spot obvious red flags - wrong brand, visible damage, aged equipment. A licensed electrician panel inspection goes deeper. We open the panel, test each breaker, check every connection, and identify the exact brand and age. You get a written report that can be used in negotiations or shared with your real estate attorney.
Older homes in South Arlington, Dalworthington Gardens, and Pantego are the most common pre-purchase inspection calls we get. These neighborhoods have a high rate of Federal Pacific and Zinsco panels in homes built in the 1960s and 70s. If the panel is one of those brands, you need to know the replacement cost before you finalize the purchase price.
⏱️ Scheduled within 24-48 hours - we know closings have deadlinesYour insurance company sent a letter asking for a panel inspection report. Or they are requiring documentation before writing a new policy on the home you are purchasing.
This is happening more frequently in Texas. Insurers are paying attention to panel brands, panel age, and whether the home has outdated wiring. When they require an inspection, they usually specify what the report must include.
Bolt Electric provides a written inspection report that documents the panel brand, age, amperage rating, condition of breakers and connections, any code violations found, and the name and license number of the licensed electrician who performed the inspection. That is exactly what Texas insurance companies ask for.
📄 Written report accepted by Texas insurance companiesYou moved into an older Arlington TX home and you are not sure what is in the panel. Or you have lived there for years and the panel has never been looked at. Or you are planning an addition or an EV charger and you want to know what the panel can handle before you commit to the project.
This is worth doing. One hour and a written report gives you a clear picture of your panel's current condition, its remaining capacity, and anything that needs attention. You stop guessing and start knowing.
✅ Same-day written report in most casesHere is exactly what Bolt Electric inspects on every panel inspection visit. Nothing is skipped.
Panel brand and model - including identification of Federal Pacific, Zinsco, Pushmatic, and other problem brands
Panel age and estimated remaining service life
Main breaker condition, rating, and operation
Individual breaker condition - any that are warm, physically damaged, or failing
Bus bar condition - corrosion, overheating signs, or physical damage
Wiring connections at each breaker - loose connections are a leading cause of panel fires
Double-tapped breakers - two wires on one breaker terminal is a code violation in most cases
Available spaces for new circuits
Grounding and bonding - properly connected or missing
Evidence of unpermitted DIY modifications
Overall amperage capacity vs. current and planned electrical load
GFCI and AFCI breaker coverage where code requires it
After every panel inspection in Arlington TX, Bolt Electric provides a written report. Here is what that report documents:
Panel brand, model, and age
Amperage rating of the main breaker and panel
Condition rating of the panel overall
Specific findings for each breaker tested
Any code violations found, with explanation
Safety issues identified, ranked by priority
Recommended repairs with approximate cost ranges
Name, license number, and signature of the licensed electrician
Date of inspection and property address
Texas homeowner insurance companies requiring panel documentation
Real estate attorneys handling negotiation credits on a home purchase
Sellers providing disclosure documentation
Buyers confirming the condition of the panel before closing
Arlington Building Inspections Division if code compliance documentation is requested
This is the question every homebuyer has before they call. The answer is straightforward.
If we find something during the panel inspection, we tell you exactly what it is, what risk level it represents, and what it costs to fix. We do not start any repair work without your approval.
Here is how it typically plays out for each buyer type:
If the panel is a Federal Pacific or Zinsco brand, we document that in the report and provide a replacement cost estimate. You can use that estimate to negotiate a price reduction with the seller, request the seller replace the panel before closing, or factor the cost into your offer decision.
If the panel has code violations or minor issues, same process. Written finding plus cost estimate. You decide what to do with that information.
We do not push repairs during an inspection visit. Our job on inspection day is to document what is there and give you accurate information. Repair scheduling is a separate conversation.
If the insurer requires specific repairs before issuing coverage, we document the findings in the report and give you a firm repair price. Many Arlington homeowners schedule the inspection and the repair in back-to-back visits so the insurer gets documentation of both within the same week.
If everything looks good, you get a clean written report and you stop worrying. If we find something, you get the same written documentation and cost estimate. Either way, you come out of it knowing the actual condition of your panel.
During a panel inspection, we also assess the meter base and service mast when accessible. These are the connection points between the utility line and your home's electrical system.
The meter base is the box mounted on the outside of your home where Oncor Electric Delivery attaches the meter. Over time, meter bases corrode, sustain weather damage, or develop loose connections. A damaged meter base can cause intermittent power loss, meter read errors, or Oncor to disconnect service entirely until the base is repaired.
We inspect the meter base during a panel visit when it is accessible. If we find damage or corrosion, we provide a repair or replacement estimate. Meter base replacement requires Oncor coordination, which Bolt Electric handles directly.
The service mast is the pipe or conduit that runs up the side of your home and holds the service entrance cable - the wires coming from the utility pole to your meter. Storm damage, age, and rust can compromise the service mast.
A damaged service mast is a safety issue. If the conduit is cracked or the cable is exposed, moisture can enter the system. Oncor may disconnect service at a home with a damaged service mast until repairs are made.
If we spot service mast damage during an inspection, we document it in the report and provide a repair estimate. Repairs require Oncor Electric Delivery coordination in most cases, which we handle as part of the job.
Electrical panel inspections in Arlington TX. Written reports. Fast turnaround. Homebuyer deadlines accommodated.
We handle panel inspections throughout all of Arlington TX and surrounding communities.
For homebuyers with a closing deadline, tell us your date when you call. We work around it.
(817) 754-5700 📞 Call Now - 24-48 Hr SchedulingPanel flagged as Federal Pacific or Zinsco? Electrical panel replacement in Arlington TX.
View panel replacement →Panel undersized for your needs? Electrical panel upgrade in Arlington TX.
View panel upgrade →Box damaged or failing? Breaker box replacement in Arlington TX.
View breaker box replacement →Full home inspection beyond the panel. Electrical safety inspection in Arlington TX.
View safety inspection →Aluminum wiring often found during older home inspections. Aluminum wiring repair in Arlington TX.
View aluminum wiring →Full residential services. Residential electrician in Arlington TX.
View residential services →A dedicated panel inspection from Bolt Electric typically runs $75 to $150. If repairs are approved and performed the same day, the inspection fee is often credited toward the repair cost. We confirm the fee on the call before we schedule.
Most panel inspections take 45 minutes to 90 minutes. If we find an issue that requires more detailed assessment, we tell you before we go further. You get a written report the same day in most cases.
Call us at (817) 754-5700 and tell us your closing date. We schedule the inspection within 24 to 48 hours in most cases and provide a written report the same day. If the panel is a Federal Pacific or Zinsco brand, the report documents that finding along with a replacement cost estimate you can use in negotiations with the seller.
Texas insurance companies typically require a written report documenting the panel brand, age, amperage, condition, and any safety issues or code violations. Bolt Electric provides all of that in a signed written report with the licensed electrician's name and license number. Most insurers accept this format. If your insurer gives you a specific form, share it with us before the inspection and we will make sure the report covers everything they ask for.
A double-tapped breaker means two separate wires are connected to a single breaker terminal that was only designed for one. Most breakers are not rated for two wires. The connection becomes unreliable over time - the breaker may trip inconsistently or fail to trip when it should. This is a code violation in most configurations and is one of the most common findings in older Arlington TX homes. The fix is usually adding a new breaker slot, not a full panel replacement.
A general home inspector can flag obvious problems - wrong brand, visible burn marks, outdated equipment. They cannot go as deep as a licensed electrician. They do not typically open the breaker compartment or test individual breakers under load. A licensed electrician panel inspection gives you the specific findings, brand identification, code violation details, and cost estimates that a general inspection cannot. Insurance companies and real estate attorneys almost always require the licensed electrician report, not the general home inspection report.
The meter base is the box on the exterior of your home where Oncor Electric Delivery connects the electric meter. We assess the meter base during a panel inspection when it is accessible. If we find corrosion, damage, or loose connections, we document that in the report and provide a repair estimate. Meter base problems can cause power loss or Oncor service disconnection if left unaddressed. If your home is in an older Arlington TX neighborhood, the meter base is worth adding to your inspection checklist.
Whether you are buying a home, responding to your insurance company, or just want to know what is in your panel, one call gets you the answer.
Bolt Electric provides written panel inspection reports accepted by Texas insurance companies and real estate attorneys. We accommodate homebuyer closing deadlines. We assess the meter base and service mast when accessible.
We serve South Arlington, Dalworthington Gardens, Pantego, Kennedale, and all of Arlington TX.
(817) 754-5700